Aquilone Model Cover

Installation service available on request

The Aquilone Model Cover protects against pollution and other types of wear caused by atmospheric agents. It shields your vehicle from hail, rain, and sun, but not from snow. In the event of snow, we recommend removing excess weight daily to prevent overloading. Without such precautions, Co.AR.CA Ltd accepts no responsibility.

Technical Specifications:
PVC fabric, double-coated, 700 g/m², waterproof, highly resistant, Class 2 self-extinguishing, heat-sealed.
The base cover is open on all four sides, with only the roof being covered.
The structure is made of hot-dip galvanised iron ø 40×2 with ø 45×2 connecting joints, a material that does not rust.
The structure is extremely robust since, along the lower and upper perimeter, between each span (excluding the front/entrance side), cross connections are mounted to keep the entire structure compact and stable.
On the roof, to ensure compactness and to prevent water pockets or deformations caused by snow, an additional arch is inserted between each frame. At the base joint of every support post a 100×100 mm plate is provided with four ø 10 mm holes at the corners for anchoring with plugs.

• Item Code 10.600.01 side height/support post H 2.50 m | 5.00 × 6.00 × H 3.00 m at ridge
• Item Code 10.600.02 side height/support post H 2.50 m | 5.00 × 7.00 × H 3.00 m at ridge
• Item Code 10.600.03 side height/support post H 2.50 m | 5.00 × 5.00 × H 3.00 m at ridge
• Item Code 10.600.04 side height/support post H 2.50 m | 6.00 × 6.00 × H 3.00 m at ridge
• Item Code 10.600.05 side height/support post H 2.50 m | 6.00 × 7.00 × H 3.00 m at ridge
• Item Code 10.600.06 side height/support post H 2.50 m | 6.00 × 8.00 × H 3.00 m at ridge
• Item Code 10.600.07 side height/support post H 2.50 m | 7.00 × 7.00 × H 3.00 m at ridge
• Item Code 10.600.08 side height/support post H 2.50 m | 7.00 × 8.00 × H 3.00 m at ridge

Item Code 10.204.02 Anchor Bolt Kit to be inserted into the 100×100 mm base plate with 4 ø 10 mm holes at the corners for bolt fixing.

Item Code 10.204.04 Peg Kit – if anchoring with bolts is not required, we alternatively provide, on request, an L-shaped iron peg 50×50 mm, 500 mm long, with S-hook, mounted on the crossbeam at the base of each span.