Dolomiti model cover

Installation service available on request

Protects your vehicle from hail, rain, sun, and snow. In the event of snow, we recommend removing excess weight to prevent overloading. Without such precautions, Co.AR.CA Ltd accepts no responsibility. The Dolomiti Model Cover also protects against pollution and other types of wear caused by atmospheric agents.

Technical Specifications:
PVC fabric, double-coated, 700 g/m², waterproof, highly resistant, Class 2 self-extinguishing, heat-sealed.
The base cover is open on all four sides, with only the roof being covered.
The structure is made of hot-dip galvanised iron ø 40×2 with ø 45×2 connecting joints, a material that does not rust.
The structure is extremely robust since, along the lower and upper perimeter, between each span (excluding the front/entrance side), cross connections are mounted to keep the entire structure compact and stable.
On the roof, to ensure compactness and to prevent water pockets or deformations caused by snow, an additional arch is inserted between each frame. At the base joint of every support post a 100×100 mm plate is provided with four ø 10 mm holes at the corners for anchoring with plugs.

• ITEM CODE 10.700.01 DIM. 5.00 x 3.00 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT
  • ITEM CODE 10.700.02 DIM. 6.00 x 3.00 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT
  • ITEM CODE 10.700.03 DIM. 7.00 x 3.00 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT
  • ITEM CODE 10.700.04 DIM. 8.00 x 3.00 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT
  • ITEM CODE 10.700.05 DIM. 5.00 x 3.50 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT
  • ITEM CODE 10.700.06 DIM. 6.00 x 3.50 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT
  • ITEM CODE 10.700.07 DIM. 7.00 x 3.50 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT
  • ITEM CODE 10.700.08 DIM. 8.00 x 3.00 x H 3.70 m | RIDGE HEIGHT – CLEARANCE 3.25 m | SIDE HEIGHT

On Request:
Item Code 10.204.02 Anchor Bolt Kit to be inserted into the 100×100 mm base plate with 4 ø 10 mm holes at the corners for bolt fixing.

Item Code 10.204.04 Peg Kit – if anchoring with bolts is not required, we alternatively provide, on request, an L-shaped iron peg 50×50 mm, 500 mm long, with S-hook, mounted on the crossbeam at the base of each span.

Item Code 10.205.01 System Block Kit consisting of 2 shaped galvanised iron frames with dedicated plates, fixed in place by exploiting the weight of the motorhome.

The Dolomiti Base Model structure is composed of 2 open sides (front and rear). The roof and the perimeter right and left sides are closed with PVC fabric, double-coated, 700 g/m², waterproof, highly resistant, Class 2 self-extinguishing, heat-sealed.

The entire perimeter of the front and rear sections is heat-sealed with a sleeve, allowing the insertion of a ratchet strap, which is then used to secure the fabric to the structure.

On the lower right and left sides of the structure, perimeter cross connections are installed between each span, both on the lower and upper parts of the structure, joined by connecting joints to form each span.

To secure the fabric to the structure, on each span along the bottom of the fabric, heat-sealed sleeve strips are provided, allowing the insertion of the cross connection, which—together with ratchet straps—secures the fabric to the structure itself.

The structure is designed to allow the addition of a rear closure, a sliding front or rear closure, or a partial front/rear closure made of PVC fabric, double-coated, 700 g/m², waterproof, highly resistant, Class 2 self-extinguishing, heat-sealed.

The structure is designed to allow the addition of a rear closure, a sliding front or rear closure, or a partial front/rear closure in PVC fabric, double-coated, 700 g/m², waterproof, highly resistant, Class 2 self-extinguishing, heat-sealed.

Item Code 10.100.05 PVC panel/head kit 3.00 x H 2.00 m for front closure of Dolomiti Model Cover, width 3.00 m. Fixed with S-hooks attached to the front supporting posts of the structure.

Item Code 10.100.06 PVC panel/head kit 3.50 x H 2.00 m for front closure of Dolomiti Model Cover, width 3.00 m. Fixed with S-hooks attached to the front supporting posts of the structure.

Item Code 10.100.07 PVC panel/head kit 3.00 x H 3.20 m for front closure of Dolomiti Model Cover, width 3.00 m. Fixed with S-hooks attached to the front supporting posts of the structure.

Item Code 10.100.08 PVC panel/head kit 3.50 x H 3.20 m for front closure of Dolomiti Model Cover, width 3.00 m. Fixed with S-hooks attached to the front supporting posts of the structure.

Item Code 10.400.07 Sliding PVC front closure panel kit for Dolomiti Model Cover, width 3.00 x 3.25 m.

Item Code 10.400.08 Sliding PVC front closure panel kit for Dolomiti Model Cover, width 3.50 x 3.25 m.

Item Code 10.400.09 PVC rear closure panel kit 3.00 x H 3.70 m for Dolomiti Model Cover, width 3.00 m. Fixed with nylon straps (Item Code FS.10.100.01) to the rear perimeter structure.

Item Code 10.400.10 PVC rear closure panel kit 3.50 x H 3.70 m for Dolomiti Model Cover, width 3.50 m. Fixed with nylon straps (Item Code FS.10.100.01) to the rear perimeter structure.

The structures are designed to be installed on a paved surface, if technically prepared.